MP Systems CNC Machine Tool
ExoMist DVM / DVL Mist Collectors Mist Collectors
Machine overview and technical information
ExoMist DVM / DVL Mist Collectors
The ExoMist DVM and DVL mist collectors are compact, high-performance units for machine tool coolant and oil mist applications. The DVM covers 350 to 700 CFM, while the DVL covers 650 to 1,200 CFM, giving shops two sizing options for different machine configurations and airflow requirements.
MP Systems supports these collectors with complete engineered mist collection kits. The goal is not only to install a mist collector. The goal is to properly size the system, route the ductwork, use the correct baffle, and create a clean, repeatable installation that helps protect filter life and shop air quality.
Designed for complete mist collection installations
- Available in DVM and DVL configurations for different airflow requirements.
- Supports water-based and oil-based coolant mist applications.
- Optional HEPA filtration available for up to 99.97% filtration efficiency.
- Compatible with pump mount, machine mount, and stand mount installations.
- Engineered hard duct kits help create consistent, professional installations.
- Properly sized baffles help capture mist while reducing coolant carryover into the collector.
Complete engineered kits from MP Systems
Mist collection performance depends on the full system, not just the collector. MP Systems can provide the collector, adjustable hard duct, baffle, mounting hardware, and other installation components needed for a cleaner, more consistent setup.
Mounting options
- Pump mount: Mounts directly to MP Systems RF8, VR8, or VRT high pressure coolant systems. This is the preferred configuration when available because it simplifies installation and keeps the system footprint consolidated.
- Machine mount: Mounts to the side or top of the machine tool.
- Stand mount: Stand-alone solution for machine tool applications where pump or machine mounting is not the right fit.
Technical specs
| Spec | DVM | DVL |
|---|---|---|
| Nominal air flow rate | 350 to 700 CFM | 650 to 1,200 CFM |
| Static pressure | 1160 Pa | 1400 Pa |
| Sound level | 66 dB | 72 dB |
| Weight | 330 lbs | 440 lbs |
| Motor | 1 HP | 3 HP |
| Average consumption | 280 to 350 W | 320 to 600 W |
| Voltage options | 200/230V or 400/460V | 200/230V or 400/460V |
| Inlet diameter | 6 in | 8 in |
Need a complete mist collection kit?
MP Systems can help configure the collector, hard duct, baffle, mounting approach, and installation components around your machine tool and shop layout.